福彩3d开奖视直播:
[1]杨晓勇,陈世春,冯强,等.全钛合金钻杆性能测试试验研究[J].石油管材与仪器,2019,5(04):30-33.[doi:10.19459/j.cnki.61-1500/te.2019.04.007]
 YANG Xiaoyong,CHEN Shichun,FENG Qiang,et al.The Experimental Study on Full Titanium Alloy Drill Pipe Performance Test[J].Petroleum Tubular Goods & Instruments,2019,5(04):30-33.[doi:10.19459/j.cnki.61-1500/te.2019.04.007]
点击复制

全钛合金钻杆性能测试试验研究
分享到:

《石油管材与仪器》[ISSN:2096-0077/CN:61-1500/TE]

卷:
5
期数:
2019年04期
页码:
30-33
栏目:
试验研究
出版日期:
2019-08-20

文章信息/Info

Title:
The Experimental Study on Full Titanium Alloy Drill Pipe Performance Test
文章编号:
2096-0077(2019)04--0030-04
作者:
杨晓勇陈世春冯强刘永峰张恒张文华
渤海钻探工程技术研究院 天津 300280
Author(s):
YANG Xiaoyong CHEN Shichun FENG Qiang LIU Yongfeng ZHANG Heng ZHANG Wenhua
Engineering Technology Research Institute, BHDC, Tianjin 300280,China
关键词:
全钛合金钻杆抗拉强度抗内压强度抗扭强度
Keywords:
full titanium alloy drill pipe tensile strength internal compressive strength torsional strength
分类号:
TE921
DOI:
10.19459/j.cnki.61-1500/te.2019.04.007
文献标志码:
A
摘要:
在对现有钛合金钻杆特点及其国内外发展现状和特殊区块钻井难点分析的基础上,提出了全钛合金钻杆(接头、管体均为钛合金材质)制造技术的研究,采用摩擦焊接技术完成了全钛合金钻杆的制造,测试了全钛合金钻杆抗拉强度、抗内压强度、抗扭强度。试验结果表明:全钛合金钻杆的抗拉、抗扭、抗内压性能参数达到了同规格105(G)级钢制钻杆性能参数水平。
Abstract:
Based on the characteristics of titanium alloy drill pipe and its development status at home and abroad as well as the difficulties of drilling in special blocks, the manufacturing technology research of full titanium alloy drill pipe (The joint and tube are all made by titanium alloy) was put forward. Friction welding technology was used to manufacture the full titanium alloy drill pipe. Tensile strength, internal compressive strength and torsional strength of the full titanium alloy drill pipe were tested. The results indicated that the tensile strength, internal compressive strength and torsional strength of full titanium alloy drill pipe reached 105 (G) level of steel drill pipe performance parameters.

参考文献/References:

今天福彩3d黑圣手 www.qfboe.tw [1] 钱江,王怡,李瑶. 钛及钛合金在国外舰船上的应用[J]. 舰船科学技术,2016,38(6),1-7.
[2] SCHUTZ R W,WATKINS H B.Rexent developments in titanium alloy application in the energy industry [J]. Materials science and engineering A, 1998,243(1-2):305-315.
[3] 刘强,宋生印,李德君,等. 钛合金油井管的耐腐蚀性能及应用研究进展[J]. 石油矿场机械, 2014,43(12): 88-94.
[4] 袁文义,张泉海.国外钛合金钻杆的研究进展[J]. 新疆石油科技,2006,16(3):13-16.
[5] 胡辛禾.钛合金钻杆-短半径水平钻井最佳选择[J]. 石油机械,2000,28(6):61.
[6] 史雪枝,周小虎. 钛合金油井管性能研究及应用评价现状[J]. 钢管,2015,44(1):10-14.
[7] 赵奇祥,赵炜. 用于短半径钻井的钛合金钻杆[J]. 石油机械,2001,29(5): 54-56.

备注/Memo

备注/Memo:
第一作者简介:杨晓勇,男,1981年生,高级工程师,2013年毕业于天津大学机械制造及其自动化专业,获博士学位,现从事石油钻、完井工具研究。E-mail:[email protected]
更新日期/Last Update: 2019-08-25