福彩3d走势图带连线:
[1]冉磊.油井产出剖面测井方法优选[J].石油管材与仪器,2019,5(04):34-37.[doi:10.19459/j.cnki.61-1500/te.2019.04.008]
 RAN Lei.Optimization of Well Production Profile Logging Method[J].Petroleum Tubular Goods & Instruments,2019,5(04):34-37.[doi:10.19459/j.cnki.61-1500/te.2019.04.008]
点击复制

油井产出剖面测井方法优选
分享到:

《石油管材与仪器》[ISSN:2096-0077/CN:61-1500/TE]

卷:
5
期数:
2019年04期
页码:
34-37
栏目:
仪器设备与应用
出版日期:
2019-08-20

文章信息/Info

Title:
Optimization of Well Production Profile Logging Method
文章编号:
2096-0077(2019)04--0034-04
作者:
冉磊
大庆油田有限责任公司测试技术服务分公司 黑龙江 大庆 163000
Author(s):
RAN Lei
Logging and Testing Services Company,Daqing Oil Field Co. Ltd., Daqing,Heilongjiang 163000, China
关键词:
产出剖面测井测量范围适用性脱气影响
Keywords:
production profile logging measurement range applicability degassing effect
分类号:
TE36
DOI:
10.19459/j.cnki.61-1500/te.2019.04.008
文献标志码:
A
摘要:
随着油田进入开发中后期,地层条件变的越来越复杂,测准测全各层段的产液量和含水率也越来越重要,但由于井下流体均以三相流态存在,脱气影响对产出剖面测井结果起到了关键作用。为此,针对目前油田常用的五种产出剖面测井仪器,在北二西水驱两口油井分别开展了产出剖面测井方法对比试验,对比试验主要从测量范围、测试精度、测试结果准确性等方面判断仪器的适用性。对比分析产出剖面测试资料,表明采用两相流仪器录取三相流井结果不够准确,采用油气比校正是不准确的,需要进一步完善三相流测井技术;对脱气井,探针、电导和同轴仪器测试方法更适宜;对不脱气井,五种方法均适宜。通过对五项测试技术进行综合评价,为下步优化产出剖面测井技术服务提供依据。
Abstract:
With the development of oil field in the middle and late period, the formation conditions become more and more complex, and it is more and more important to measure the production volume and water content of all layers. However, due to the existence of threephase flow state in underground fluids, the influence of degassing on the output profile logging results plays a key role. Therefore, to compare the five kinds of output profile logging instruments commonly used in oil fields, a comparative test of output profile logging methods was carried out in two water driving wells in north and west respectively. The comparison was mainly conducted on measurement scope, test accuracy, and test results accuracy to judge the applicability of the instruments. Comparing and analyzing the output profile data, it is shown that the results of adopting twophase flow instruments to logthreephase flow wells are not accurate enough, the oil and gas ratio correction is inaccurate, and it is necessary to further improve the threephase flow logging technology. For degassing wells, probe, conductance and coaxial instrument test methods are more suitable, and five methods are suitable for nondegassing wells. The comprehensive evaluation of five test techniques provides the basis for optimizing the output profile logging technology service in the next step.

参考文献/References:

今天福彩3d黑圣手 www.qfboe.tw [1] 王延军,成志伟,张玉辉,等.基于电磁法高含水油井产液剖面测井仪现场应用[J]. 测井技术,2017,41(4):433-433.
[2] 赵鑫,赵继惠,光伟.阵列探针测井在产出剖面的应用[J]. 化工管理,2013,(22):131-133.
[3] 王淑华.阵列探针产出剖面测井仪性能评价[J]. 化工管理,2016,8(35):152-155.
[4] 任尚华.大庆外围油田产出剖面测井流量测量精度分析[J]. 石油仪器,2009,23(2):54-59.
[5] 周淑华,王俊,杨金山,等. 同轴线相位法找水仪的应用[J]. 大庆石油学院学报,2005,29(6):93-94.
[6] 高超.产出剖面测井资料的应用[J]. 中国科技博览,2010,(33):283-283.
[7] 高尚.基于气液分流的低产液高含水三相流测量方法研究[D].大庆:东北石油大学,2013.
[8] 高尚,刘兴斌,李雷,等.分流式阻抗产液剖面测井仪的设计研究[J]. 石油仪器,2013,27(2):4-6.
[9] 姜兆宇,杨韵桐. 双级分流伞气液分离装置的设计及数值模拟[J]. 石油管材仪器,2018,4(4):47-49.
[10] ?;?三相流产出剖面测井在大庆油田适用性研究[J]. 测井技术,2004,28(4):346-347.

相似文献/References:

[1]陈龙林.用于产出剖面测井的高可靠防砂卡涡轮流量计[J].石油管材与仪器,2018,4(03):58.[doi:10.19459/j.cnki.61-1500/te.2018.03.014]
 CHEN Longlin.Highreliability Antisand Turbine Flowmeter for Production Profile Logging[J].Petroleum Tubular Goods & Instruments,2018,4(04):58.[doi:10.19459/j.cnki.61-1500/te.2018.03.014]

备注/Memo

备注/Memo:
第一作者简介:冉磊,男,1984年生,工程师,2007年毕业于东北石油大学石油工程专业,现在主要从事油田技术工作。E-mail:[email protected]
更新日期/Last Update: 2019-08-25